Trend NX Variable Speed Drives Instrukcja Użytkownika Strona 113
- Strona / 136
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
96 • vacon CONTROL KEYPAD
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
7
Example:
• Transfer delay between the frequency converter and the PC = 600 ms
• The value of par. 6.7.3 is set to 1200 ms
(2 x 600, sending delay + receiving delay)
• The corresponding setting shall be entered in the [Misc]-part of the file NCDrive.ini:
Retries = 5
AckTimeOut = 1200
TimeOut = 6000
It must also be considered that intervals shorter than the AckTimeOut-time cannot be used in NC-Drive
monitoring.
Enter the edit mode by pushing the
Menu button right
. Use the
Browser buttons
to change the
acknowledgement time. Accept the change with the
Enter button
or return to the previous level with the
Menu button left
.
Figure 7-23. HMI acknowledge timeout
Number of retries to receive HMI acknowledgement (P6.7.4)
With this parameter you can set the number of times the drive will try receive acknowledgement if this
does not succeed within the acknowledgement time (P6.7.3) or if the received acknowledgement is faulty.
Enter the edit mode by pushing the
Menu button right
. The present value shown starts to blink. Use the
Browser buttons
to change the amount of retries. Accept the change with the
Enter button
or return to the
previous level with the
Menu button left
.
See Figure 7-23 for the procedure of changing the value.
7.3.6.8 System info
In the
System info submenu
(S6.8) you can find frequency converter-related hardware and software
information as well as operation-related information.
Total counters (S6.8.1)
In the
Total counters
page (S6.8.1) you can find information related to the frequency converter operation
times, i.e. the total numbers of MWh, operation days and operation hours passed so far. Unlike the
counters in the Trip counters , these counters cannot be reset.
Note! The Power On time counter (days and hours) runs always, when the power is on.
Page Counter Example
C6.8.1.1. MWh counter
C6.8.1.2. Power On day counter Value on display is
1.013
. The drive has operated
for 1 year and 13 days.
C6.8.1.3. Power On hour counter Value on display is 7:05:16. The drive has
operated for 7 hours 5 minutes and 16 seconds.
Table 7-7. Counter pages
READY
I/Oterm
200ms
READY
I/Oterm
enter
200ms
HMI ACK timeout
HMI ACK timeout
- NX Variable Speed Drives 1
- Installation Manual 1
- Contents 4
- Trend NX Drives 5
- 1 TREND NX DRIVES 5
- 2.1 Connections 9
- (109 yds) 10
- Sensors 11
- Digital Inputs 11
- Plotting Channels 13
- 2.2 Sample Applications 14
- START-UP QUICK GUIDE 19
- CONTENTS 20
- VACON NXS/P USER’S MANUAL 20
- Document code: ud00701S 22
- Date: 7.12.2005 22
- 2.2.1 General 26
- 2.2.2 Technical criteria 26
- EU DIRECTIVE vacon • 11 28
- Vesa Laisi 28
- President 28
- 12 • vacon EU DIRECTIVE 29
- vacon • 13 30
- Drive modified 31
- TECHNICAL DATA vacon • 23 40
- 4.4 Technical data 40
- 24 • vacon TECHNICAL DATA 41
- 26 • vacon INSTALLATION 43
- INSTALLATION vacon • 27 44
- 28 • vacon INSTALLATION 45
- INSTALLATION vacon • 29 46
- 30 • vacon INSTALLATION 47
- 32 • vacon INSTALLATION 49
- Type plate 50
- Warning plate 50
- 34 • vacon INSTALLATION 51
- 5.2.1 FR4 to FR9 52
- 0009NX5 400V 0012NX5 400V 54
- 38 • vacon INSTALLATION 55
- INSTALLATION vacon • 39 56
- 40 • vacon INSTALLATION 57
- 6.1.1 Power connections 58
- 6.1.1.3 Control cable 59
- Min cable 61
- EMC Level modified 62
- Mounting procedure 64
- MAINS MOTOR 67
- Figure 6-7. Vacon NX, FR4 68
- Figure 6-9. Vacon NX, FR5 69
- Figure 6-11. Vacon NX, FR6 70
- Figure 6-13. Vacon NX, FR7 71
- Figure 6-18. Vacon NX, FR9 74
- B– B+/R+ R– 75
- on the control board 77
- Basic relay board 78
- 6.2.1.1 Control cables 79
- FAULTSTOP 84
- (See control keypad) 85
- 7.2.1 Button descriptions 86
- Location 87
- Description 87
- Number of items 87
- 13.95 Hz 89
- 2 Push the 90
- Min Frequency Min Frequency 91
- I/O term 92
- 7.3.3.2 Keypad reference 93
- Enter button 93
- 7.3.3.3 Keypad direction 93
- Active faults 94
- F T1 95
- 7.3.4.2 Fault codes 96
- 80 • vacon CONTROL KEYPAD 97
- CONTROL KEYPAD vacon • 81 98
- 82 • vacon CONTROL KEYPAD 99
- Real time record 100
- Fault history 11 Output phase 101
- Operation days 101
- PUSH to reset 101
- Menu button right 102
- 7.3.6 System menu (M6) 102
- System menu 102
- 86 • vacon CONTROL KEYPAD 103
- Francais 104
- Standard 105
- Multi-step 105
- All param 106
- Not in use 108
- Startup wizard Startup wizard 109
- Startup wizard 109
- ChangeEnable 110
- ChangeEnable ChangeDisable 110
- Timeout time 111
- Timeout time Timeout time 111
- Continuous 112
- Temperature 112
- HMI ACK timeout 113
- Trip counters 114
- Clr Optime cntr 114
- NXFIFF01 115
- A:NXOPTA1 116
- Expander boards 116
- C:NXOPTC1 117
- Parameters 117
- Slave address 117
- HOT SURFACE 118
- Reset button 120
- 104 • vacon FAULT TRACING 121
- and restart 121
- FAULT TRACING vacon • 105 122
- 106 • vacon FAULT TRACING 123
- Jum p e r b lo ck X 3 : 125
- CM A and CMB grounding 125
- 8 • vacon Basic Application 126
- 1= Offset, 4mA—20 mA 128
- Selection of language 131
- Selection of application: 131
- No editing! 132
- Stop Button Activated 133
- Trend Control Systems USA 136
GBC 9665952 manuály
Uživatelské manuály a uživatelské příručky pro Kroužkových pořadačů GBC 9665952.
Poskytujeme 1 manuály pdf GBC 9665952 ke stažení zdarma podle typů dokumentů: Datový list
Komentarze do niniejszej Instrukcji